Why do programmers only turn off the monitor and never turn off the computer after get off work Check out the answers on the major websites~

Comprehensive from: MOOC, Zhihu, CSDN

01

Answers to the first 100 questions and answers: jingmentudou

Because you never know when you’ll be woken up. Open a remote can avoid going to the company in the middle of the night.

02

Yue Yao jade

In this line, the computer starts when the power button is pressed, in addition to the driver will automatically start, you need to recheck the major runtime libraries, you need to rebuild the [virtual machine] , you need to reactivate some unknown software, you need to open more than a dozen Even for a lot of professional software, all chat communication software needs to be opened, and some pcie channel expansion cards need to be re-tested for running problems (the graphics card does not light up, the sound card is blown up), and the computer that is the master computer needs to be reconnected to all devices. …emmm

03

Ma Ma silver 09

I opened the machine with strength, why should I turn it off?

04

Shen Ye Lone Star tebxke7f67

When I first went to our company, I shut down the computer every day to get off work, and then turned on the computer after going to work. Until one day, I found that several of their computers were never turned off, not on Saturdays and Sundays, and even more exaggerated is that my boss once went on a business trip for a week without turning off the computer. This seems to have opened the door to a new century for me. Since then, I have also started to only turn off the display screen after get off work, and turn on the display screen when I go to work, so that I don’t have to do the following operations every day when I go to work.

  1. Start WeChat, confirm the login, and confirm with the mobile phone. It is more useful when you don’t bring your mobile phone.

  2. Enter the password to log in to the bastion machine, enter the password to log in to the server, and sometimes need to enter the password several times.

  3. Work hard to find the breakpoint of the work that has not been done last night, and then start again, and re-think your ideas.

  4. Open Sublime and open to the directory where the code was last written.

  5. Open another server and prepare to provide data to people. Especially when I found out that there were more than ten small icon programs running at the bottom of my computer screen, I wondered if there would be any temporary things that would be turned off by me when I turned off the computer, I thought about it: Forget it, then Don’t close it.

Let’s talk about whether there are security risks. Programmers can connect to the company’s computer at home after get off work. Generally, the company’s computers are on the intranet, and they cannot be connected at home under normal circumstances.

If the company does not force the computer to be shut down but also allows remote connections, there will indeed be security risks. Of course, we are very resistant to companies allowing remote connections to internal computers outside the company, because this means that you may be woken up by the phone ring at any time. Remote connection go to work.

05

Xinrui talks about history

One of the biggest misconceptions other people have about programmers: When the programmer is off work, so are his computers, test machines, and servers.

06

hey me

You can remote your own computer at any time and call something.

07

Shuoyuan Wenwan

Because their boss said that the computer should not be turned off, he may come over to work overtime.

08

YUILILI

As a college dog at school, I have also developed the habit of not turning off the computer. I feel that the startup is slow, the tool is slow to open, and I have to think about what I did last night, so I basically do not turn off the computer, just sleep.

09

OLDKING

Because programming may use a lot of auxiliary tools or web pages, if the development tool does not have a memory function, it will be troublesome to close and reopen, and the second idea may be broken.

10

xushenzi

Because you don’t know when you’re going to use it the next moment. It is convenient to get up in the middle of the night to fix the bug.

11

bangs

I never shut down because starting the front-end project development environment requires various pre-commands, which is very troublesome.

What’s more, the solution found at that time is still open in the browser. If it is turned off, it will be lost. In fact, the biggest fear of shutting down is that important things will be lost, but I forgot what will be lost. Forget it, for the front end, calmness is the mainstream.

How often do you turn off the machine? You can never turn it off if you can, just like a boiled eagle, here is the boiled computer. Whenever it can’t hold it anymore, just let it restart once, and you can’t be too harsh.

12

Zhao Yue

I didn’t turn off the computer because I didn’t finish my work today, and the computer had to keep thinking on the spot. For example, when the browser searched for information pages, the location of classes in the project, SQL statements, etc., the next day came, and you could quickly pick up the ideas of the previous day.

Once when I got off work, I closed the unfinished SQL, and when I went to work the next day, I completely forgot the ideas that I wrote half of the previous day. After all, programmers are fish.

If my work is done by the end of the day, I still shut down.

13

Simon Bohu

Restarting the computer will affect the way of working. For example, various applications need to be reopened. The desktop of the programmer is generally very messy, and the files in the hard disk are also very messy. Only the very important files are installed in a “new folder”. It doesn’t look very messy, but they know where each file is placed.

Open IDEA and locate yesterday’s code, ten minutes

Open Navicat, two minutes

Open the note-taking software, one minute

Open the browser, find yesterday’s history, five minutes

Turn on Charles, three minutes

Open various IM software, five minutes

Open Xshell, connect, five minutes

Open the mailbox, two minutes

……

I don’t shut down because I’m too lazy. Most of the computers configured by companies for programmers are not too high in performance, and have a long service time. It takes a long time to turn on and off once.

From booting up to opening various software, and then entering the working state, God knows how long it will take.

Besides, the working state of the usual programmers is that there is a phone call to say that there is a problem with the online, and it should be dealt with quickly. Time is urgent, and the problem can be solved just by turning it on. Time is money, so I never switch off.

Once encountered a failure, involving a relatively high level of core business. I was driving home at the time. After hanging up the phone, I pulled over immediately and turned on the computer to fix the fault (when my wife was away, the computer was in the co-pilot).

Several of us in the message group responded and were processing at almost the same time. After a minute, I fixed it, and I know everyone in the group. A classmate said, “Emma, ​​I just turned it on!” Hehe, he actually turned it off after get off work, but that colleague doesn’t dare to turn it off after get off work even if he gave him money.

As for when does it shut down? I don’t seem to have shut down the laptop since I took it from the company. No, the computer restarted once during the upgrade the year before, which delayed a lot of things, and has never been turned off since.

A few new programmers were hired by the company. When they got off work, they found that they only turned off the monitor but not the computer. They said they were worried that they could log in remotely to solve the problem. Is there any security risk for the company? Is the computer habitual? After posting the question, the questioner silently turned off the computer for the new programmers, and suddenly felt that he had contributed to the security of the company and the saving of company resources. , a sense of pride arises spontaneously! It feels great to send a few!

Results the next day…

The person who was shut down on the computer, Programmer A, the computer was working automatically at the time of the incident

Like many programmers, A is very good at arranging work time reasonably, and will put work tasks such as monitoring, compilation, and calculation after get off work, and the machine will automatically perform them. In this way, when you go to work the next day, these tasks are completed, and you can go directly to the next work link. This is one of the common ways to increase productivity among programmers.

As a result, after arriving at the company the next day, Programmer A suddenly growled: Who turned off my computer? ? ! ! The next day, computer A was running and compiling, and he was leaning back in his chair and secretly playing the king of pesticides.

The person whose computer was shut down, Programmer B, is on call at any time after get off work, ready to remotely connect to the company’s computer and do some emergency treatment

After overtime, B leaves work without turning off the computer as usual. Today, he had a strong premonition that he would receive a “serial deadly call” at night. Sure enough, at 11 o’clock in the evening, B received a call from the leader, and there was a problem with the online service, so he wanted to use SSH (Secure Shell, not Refers to the Java EE family bucket) connected to the workstation machine to repair the problem. However, B actually found out: Who turned off my computer? ? ?

As a result, B was scolded by the leader… He could only take a taxi and go back to the unit to fix the bug.

For companies, connecting to a computer remotely can make problems more efficient and timely; for programmers themselves, no matter where they are, as long as they have a computer that can be connected to the Internet, they can Desperate to rush to the company to deal with it, especially late in the winter night. So, it’s a win-win.

The person who is shut down on the computer, programmer C, saves all the time for coding

C wants to work more efficiently, and hopes that every second of work time will not be wasted, so he never turns off the computer after get off work. As a result, on the second day of the crime, C is surprised to find out: Who turned off my computer? Then silently reopen N browser tabs, editor/IDEtab, command line tool tabs, document tools, communication tools (N>=3), as well as music apps, note-taking tools, package capture tools, various GUI tools… I also worked hard for a long time to find the breakpoint of the previous day…

Seeing this, you know how hard it is to reboot, right? It is better to simply turn on the computer, and continue to work directly the next day (well, being lazy is only a small part).

PS. This is the truth, but the above scenes are purely fabricated~(´ε`)

Recommended reading:
Getting Started: The most complete zero-based learning Python problem   | Zero-based learning Python for 8 months |  Practical projects  | Learning Python is this shortcut
Dry goods: Crawling Douban short reviews, the movie "Later Us" |  Analysis of the best NBA player in  38 years | From much anticipation to word of mouth! Tang Detective 3 is disappointing |  Laughing at the new Eternal Dragon Saber  | Lantern riddle answering king |Use Python to make a large number of sketches of young ladies |Mission Impossible is so popular, I use machine learning to make a mini recommendation system movie
Fun: Pinball game |  Jiugongge   | Beautiful flowers |  Two hundred lines of Python "Running every day" game!
 AI:  Robot that can write poetry  | Coloring pictures |  Predicting income  | Mission Impossible is so popular, I use machine learning to do it A mini recommender system movie
Widget: Convert Pdf to Word, easily get tables and watermarks! |  Save html web pages as pdf with one click! | Bye bye PDF extraction charges! | Create the strongest PDF converter   with 90 lines of code, one-click conversion of word, PPT, excel, markdown, html | Make a DingTalk low-cost ticket reminder! |60 lines of code make a voice wallpaper switcher, watch Miss Sister every day! |

The year’s hottest copy

  • 1) .Fuck! Convert Pdf to Word easily with Python !

  • 2). Learning Python is really fragrant! I made a website with 100 lines of code, helped people PS travel pictures, and earned a chicken leg to eat

  • 3). The first broadcast has exceeded 100 million, and it has become popular all over the Internet. I analyzed “Sister Riding the Wind and Waves” and found these secrets 

  • 4). 80 lines of code! Use Python to make a Doraemon clone 

  • 5). 20 python codes you must master, short and powerful, infinitely useful 

  • 6). A collection of 30 Python weird tricks 

  • 7). The 80 pages I summarized in the “Rookie Learning Python Selected Dry Goods.pdf” are all dry goods 

  • 8). Goodbye Python! I’m going to learn Go! 2500 words in-depth analysis !

  • 9). Discover a licking dog benefit! This Python crawler artifact is so cool, it automatically downloads pictures of girls

Click to read the original text and watch my video at station B!

Leave a Comment

Your email address will not be published. Required fields are marked *